• 20 hydraulic pumps, serviceable and some needed overhaul,
• Hydraulic pump AA205010 x 4 each
• Voltage regulator, type 158,
• Actuator, linear pn 34622
• Prop spinner
• Engine gear, planetary assy
• Prop governor, PN 5U18-48, 6 each
• A/C engine auxiliary oil-transfer pump assy PN 112127-010-03
• Fuel pump 9750 (AN4102-1)
• Connie Manuals, all
• Engine nose gear prop case
• Wooden box full of engine exhaust and inlet ducts
• Engine oil tank, 2 each
• Lincoln arc welder, AC-225-s
• 4 prop blades for 43H60 model
• Complete 43H60 dome assy, brand new
• Power recovery turbine, 1 each
• Engine cowling, lower chin
• Engine cowling, upper chin
• Engine cylinders, 3350, 20 each
• Complete set of connie microfilm
• Engine hydro pump, vickers AA20510 ( 30 )
• Engine fuel pump PN CE9159 AAC 4 each
• Triple starting coil, PN SCA24A1
• Engine cowl flap motor, EE-4520M1, over 10 each
• Engine oil cooler flap motor assy, 34622-1, 4 each
• Magneto assy PN 1-32830-L Bendix , 8 each
• Engine master control, 6 each
• Distributors, PN 10.32515.6L , 10 each
• Ignition coils, 30 each
• Ignition fuel pumps, PN D-126293, 6 each
• Aircraft fuel filters, 3 each
• Inverter PN E1725-1, 2 each
• Motor generator-2500 VA single phase 400 cycle, 2 each
• MLG Actuator, PNK41025-1 , 2 eACH
• Nose Gear actuator PN K41025-1, 2 each
• Prop feather pump, 112577-041-01, 7 each
• Engine / cabin super charger assy 1left, 1 right
• Cabin heat exchangers, 4 each
• Prop sync box, pn 322518, 1 each
• Hydraulic accumulator model AA 14013F
• Voltage regulator PN 849115
• PRT hoods
• MLG actuator 487945
• Engine oil cooler
• Wing fuel boost pump, A9359A1
• New nose landing gear assy, 1 each
• Lots of miscellaneous clamps, hoses, plugs,